Heart with Wings Clipboard

 

Products Used

Bisque
  • MB-1451 Clay Clipboard
Color
  • SC-1 Pink-A-Boo
  • SC-15 Tuxedo
  • SC-16 Cotton Tail
  • SC-74 Hot Tamale
  • NT-CLR Clear Dipping Glaze

Decorating Accessories

  • SL-447 Atomic
  • CB-110 #10/0 Liner
  • CB-106 #6 Script Liner
  • CB-604 #4 Soft Fan
  • AC-230 Clay Carbon Paper

Miscellaneous Accessories

 

CCSA Heart With Wings Clipboard
Designer: Marcia Roullard
 
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Place the pattern on top of AC-230 Clay Carbon Paper onto the bisque and outline the pattern with a pen or pencil.
  3. Place SL-446 Atomic on the center of the clipboard. Using the Foam roller, gently apply SC-1 Pink-A-Boo over the stencil. Continue to add on to the rolled stencil to cover the clipboard with the design. Tip: Hold the tip of the roller to apply the color to keep the glaze from bleeding under the stencil.
  4. Brush the wings with two coats of SC-16 Cotton Tail, and the heart with three coats of SC-74 Hot Tamale use CB-106 Script Liner.
  5. Use the CB-110 #10/0 Liner and SC-15 Tuxedo to outline the heart and wings. Use the CB-106 #6 Liner to apply one coat of SC-15 Tuxedo to the edges of the clipboard.
  6. Dip in NT-CLR Clear Dipping Glaze.
  7. Stilt and fire to cone 05/06.
  8. After the Clipboard has cooled, use epoxy to glue on the clip following the directions on the package or refer to 'Clipboard - Attaching the clip' video on the Mayco YouTube channelhttps://www.youtube.com/watch?v=-E3Qb6SQrWE.

custom-css-security