Stenciled Clipboards

 

Products Used

Bisque
  • MB-1461 Clay Clipboard
Color
  • FN-026 Salmon Mousse
  • FN-042 Teal Blue
  • FN-043 Bright Jade
  • SC-10 Teal Next Time
  • SC-16 Cotton Tail
  • SC-39 Army Surplus
  • SC-71 Purple-licious
  • SC-81 Cinnamon Stix
  • SC-88 Tu Tu Tango
  • SC-96 Cant-elope

Decorating Accessories

  • CB-604 #4 Soft Fan
  • CB-106 #6 Script Liner
  • AC-213 Sponge-on-a-Stick
  • ST-113 Circulate Stamp
  • ST-129 Mini Fern Stamp
  • SL-436 Fern Leaf Stencil
  • SL-440 Twirls Stencil
  • SL-443 Tin Ceiling Stencil

Miscellaneous Accessories

  • 2" Foam Roller  
stencil clipboards
Designer: Carmen Allen
 
 

Instructions

 

 

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.

2. Using a CB-604 #4 Soft Fan, apply 3 coats of glaze to the fron and back of the clipboards. Cover one with FN-026 Salmon Mousse, another with FN-042 Teal Blue, and another with FN-043 Bright Jade.

For the Salmon Mousse Clipboard:

3. Using an AC-213 Sponge on a Stick, dip into the SC-81 Cinnamon Stix and dab the excess off on a clean surface. apply the glaze to ST-129 Mini Fern Stamp laying flat on the table. Apply the stamp randomly all over the clipboard.

4. Gently place the SL-436 Fern Leaf Stencil on the clipboard. Using the foam roller apply SC-39 Army Surplus over the stencil. Lift sencil and repeat one or two more times randomly.

For the Teal Blue Clipboard:

5. Using an AC-213 Sponge on a Stick, dip into the SC-71 Purple-licious and dab the excess off on a clean surface. apply the glaze to ST-113 Circulate Stamp laying flat on the table. Apply the stamp randomly all over the clipboard.

6. Gently place the SL-440 Twirls Stencil on the clipboard moving from one corner to the other diagonally (you will have to use the stencil twice to reach). Using the foam roller apply SC-16 Cotton Tail over the stencil. Lift sencil and repeat.

7. Once the white is dry, repeat this process lining up the stencil with the previous application. This time apply SC-96 Cant-elope through the stencil.

For the Bright Jade Clipboard:

8. Place SL-443 Tin Ceiling Stencil in the center of the clipboard. Using the foam roller apply SC-88 Tu Tu Tango around the edges of the stencil and apply SC-10 Teal Next Time to the center. You may need to blend them a bit where they overlap.

9. Using a CB-106 #6 Script Liner, apply 1 brushstroke of SC-10 Teal Next Time to the details on the corners. Stars each stroke in the corner and brush outward. Apply an accent of SC-88 Tu Tu Tango where these larger brushstrokes meet

For All:

10. Let dry completely.

11. Stilt and fire to shelf cone 06/05.

12. After Clipboards have cooled, use epoxy to glue on the clip following the directions on the package or refer to 'Clipboard - Attaching the clip' video on the Mayco YouTube channelhttps://www.youtube.com/watch?v=-E3Qb6SQrWE.

custom-css-security