Faceted Blue Star

blue faceted star

 

Products Used

Bisque
  • MB-1499 Faceted Star
Color
  • EL-136 Lapis Lagoon
  • FN-214 Pastel Jade
  • PC-601 Clear Cascade
  • PC-602 White Cascade
  • SC-12 Moody Blue
  • SG-404 Blue Designer Liner 

Decorating Accessories

  • ST-113 Circulate Stamp
  • ST-126 Dots & Squiggles Stamp
  • CB-604 #4 Soft Fan

Miscellaneous Accessories

  • Small Ruler
  • Palette Knife
  • Sponge-on-a-Stick

 

Designer: Marcia Roullard
 
 

Instructions

1. Begin with properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust.

2.  Use a sponge on a stick to apply SC-12 Moody Blue to the ST-113 Circulate Stamp, press the stamp to the front facet of the star.

3.  Use a sponge-on-a stick to apply SC-12 Moody Blue to the ST-126 Dots & Squiggles Stamp, press the stamp on the side facets of the star.

4. Use the small ruler to outline the facets with SG-404 Blue Designer Liner. This will keep the lines straight.

5. In the center section of the star, use the Soft Fan to apply three coats of PC-601 Clear Cascade, going over the narrow facet shape next to the center with the clear cascade.

6. Use the same brush to apply two coats of FN-214 Pastel Jade to the center section of the star. Pat the area with PC-002 White Cascade. While the White Cascade is still wet, pat the area with FN-214 Pastel Jade. 

7. Use the #4 Soft Fan to apply three coats of FN-214 Pastel Jade over the center or front stamped sections of the star.

8. Use the #4 Soft Fan to apply three coats of EL-136 Lapis Lagoon over the outside edge of the star.

9. Stilt and fire to cone 05/06.

custom-css-security