Single Rose Tray
- Details
- Last Updated: Tuesday, 29 January 2013 18:12
Products Used
Bisque
Bisque
- MB-1064 Tray
- SC-26 Green Thumb
- SC-52 Toad-ily Green
- SC-73 Candy Apple Red
- SC-78 Lime Light
- SC-88 Tu Tu Tango
- FN-009 Black
- FN-014 Antique White
- S-2101 Crystal Clear Brushing
- SG-401 Designer Liner
- CB-106 #6 Script Liner
- CB-110 #10/0 Liner
- CB-604 #4 Soft Fan
- BT-910 Synthetic Sponges
- AC-230 Clay Carbon Paper
Additional Materials
- Pencil
- Download Project Pattern: Single Rose Tray Pattern
Project Info
- Designer: Tim McPheson
- Skill Level: Basic
- Time: 1½ hours
- Download Project (pdf)
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using a CB-604 #4 Soft Fan, apply 2 coats of FN-014 Antique White to the front of the tray, and 2 coats of FN-009 Black to the back and edge. Allow to dry.
- Using a pencil and AC-230 Clay Carbon Paper, trace on the pattern.
- Using a CB-404 #4 Pointed Round, block in the leaves with 2 coats of SC-78 Lime Light. Side load in SC-52 Toad-ily Green and shade one side of each leaf, then side load in SC-26 Green Thumb and shade the opposite side. Complete the stem in the same manor using a CB-110 #10 Liner.
- For the rose, apply 1 coat of SC-73 Candy Apple Red, then re-load in SC-73 Candy Apple Red and tip or side load in SC-88 Tu-Tu Tango and apply at random to the flower.
- With the SG-401 Designer Liner, outline and detail the flower and leaves. Allow to dry.
- Using a CB-604 #4 Soft Fan, apply 1 coat of S-2101 Crystal Clear Brushing to the top area of the tray. Allow to dry.
- Stilt and fire to shelf cone 05/06.