Happy Campers

MB1541 MB1542 happy camper set01 crop

Products Used

Bisque
  • MB-1541 Camper Mug
  • MB-1542 Camper Dish

 Color

  • SC-1 Pink-A-Boo
  • SC-15 Tuxedo
  • SC-16 Cotton Tail
  • SC-24 Dandelion
  • SC-37 Ivory Tower
  • SC-55 Yella Bout It
  • SC-65 Peri-Twinkle
  • SC-96 Aqu-ward
  • NT-CLR Clear Dipping

Decorating Accessories

  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • MN-002 12mm Low Track Masking Tape

Miscellaneous Accessories

  • Sponge
  • Palette 
  • Pencil
Designer: Elizabeth Carey

Instructions

  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.

  2. Use the pencil to sketch curtains in the windows.

  3. Using the Script Liner with SC-16 Cotton Tail, apply 3 coats to the trim on the campers and the inside of the mug. Allow glaze to dry between coats. Be careful not to get glaze on the trim during the subsequent steps.

  4. Using the Script Liner with SC-37 Ivory Tower, apply 3 coats to the bottom half of the campers. Allow graze to dry between coats.

  5. Using MC-002 12mm Low Track Masking Tape, tape off the bottom and top stripes on the top half of the campers.

  6. Using the Script Liner with SC-24 Dandelion, apply 3 coats to the bottom stripes and the circular window on the dish. Allow glaze to dry between coats.

  7. Using the Script Liner with SC-65 Peri-Twinkle, apply 3 coats to the top stripes and the door on the dish. Allow glaze to dry between coats.

  8. Remove the tape before the glaze is completely dry.

  9. Place the next piece of tape between the two stipes you just glazed. Place 1 more piece over the edge of the SC-24 Dandelion stripe. Using the Script Liner with SC-55 Yella Bout It, apply 3 coats of glaze to the stripes. Allow glaze to dry between coats. Remove the tape.

  10. Place tape on either side of the final stripes. Using the Script Liner with SC-1 Pink-A-Boo, apply 3 coats of glaze to the last stripes, the windows and the hubcaps. Allow glaze to dry between coats. Remove tape.

  11. Using the Script Liner with SC-96 Aqu-ward, apply 3 coats to the tires and curtains. Allow glaze to dry between coats.

  12. Use the pencil to sketch “Happy Camper” at the top of the dish. Sketch a smiley face in the circular window.

  13. Using the Detail Liner with SC-15, outline the details on the campers. Use the Soft Fan to apply 3 coats to the back of the dish and the bottom of the mug. Allow glaze to dry between coats.

  14. Fire to cone 06.

MB1542 happy camper dish crop MB1541 happy camper mug crop

custom-css-security