Quirky Stripped Dog
- Details
- Last Updated: Tuesday, 04 February 2020 21:38
Products Used
Bisque- CD016+ Quirky Dog
- EL-125 Sahara Sands
- EL-213 Painted Desert
- PC-602 White Cascade
- SC-15 Tuxedo
- SC-16 Cotton Tail
- SC-14 Java Bean
- FN-009 Black
- CG-995 Foggy Mist
Decorating Accessories
- ST-133 Woodgrain Stamp
- CB-110 Liner
- CB-602 Soft Fan
- CB-604 soft Fan
- AC-222 Medium Writer Tip
Instructions
-
Make a hole in the bottom if intended use if a planter for drainage. Fire greenware to cone 04.
-
Thin slightly FN-009 Black, pour to the inside, turn to coat, pour out the excess glaze, drain.
-
Brush on one coat of CG-995 Foggy Mist with CB-604 Soft Fan to the dog, avoid the eyes.
-
Use CB-602 Soft Fan or CB-604 Soft Fan (using the side of this brush as it is too wide) brush on EL-125 Sahara Sands heavily in a horizontal stripe, about an inch wide, next stripe is EL-213 Painted Desert, overlap the first stripe, continue on the head to the feet with the striping.
-
Pour PC-602 White Cascade into a AC-222 Bottle, use the plastic tip only to apply an uneven thick line of the cascade over the Sahara Sands stripe. I like to let the White Cascade thicken up so it will apply thick and stay put. Let dry so that it will not mingle the colors in the next step.
-
Apply two more heavy coats of the Sahara Sands and Painted Desert as in step 4. Apply over the White Cascade.
-
Remove the glaze from the nose, eyes, and the mouth line (with a clean-up tool).
-
Use a sponge on a stick to apply SC-15 Tuxedo to the ST-133 Woodgrain Stamp, press to the body and head of the dog. These lines will break up and look liked fur.
-
Brush the eyes with 2 coats of SC-16 Cotton Tail, iris with 2 coats of SC-14 Java Bean, pupil, nose and outline eyes and mouth with SC-15 Tuxedo.
-
Fire to cone 06.