Welcome Garden Plaque

Cast the "Welcome Garden Plaque" mold from Creative Paradise, then glaze with Foundations, Jungle Gems and Stroke & Coat.



Products Used

Mold
  • 4143 - Garden Plaque (from Creative Paradise)
Color
  • CG-718 Pagoda Green
  • EL-121 Copper Adventurine
  • FN-007 Green
  • FN-202 Medium Green
  • FN-007 Green
  • SC-11 Blue Yonder
  • SC-15 Tuxedo
  • SC-74 Hot Tamale
Decorating Accessories
  • BT-910 - Synthetic Sponges
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-408 #8 Pointed Round
  • CB-602 #2 Soft Fan
  • CB-602 #4 Soft Fan
Garden_Plaque
Additional Materials
  • Pencil
Project Info

Instructions


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 1 thinned coat of SC-15 Tuxedo to the garden plaque. Wipe back with a damp sponge leaving the SC- Tuxedo in the crevices and slightly darker on the background.
  3. Using a CB-408 #8 Pointed Round, apply 2 coats of FN-037 Chartreuse to the large leaf and to the ferns.
  4. Using a CB-408 #8 Pointed Round, apply 2 coats of FN-007 Green to the two medium size leaves.
  5. Using a CB-408 #8 Pointed Round, apply 2 coats of FN-020 Medium Green to the three smaller size leaves.
  6. Using a CB-602 #2 Soft Fan, apply 2 coats of CG-718 Pagoda Green to the frog except the eyes.
  7. Using a CB-106 #6 Script Liner, apply 3 Coats of SC-74 Hot Tamale to the welcome lettering and to the ladybug.
  8. Using a CB-106 #6 Script Liner, apply 1 coat of SC-11 Blue Yonder to the dragonfly wings.
  9. Using a CB-110 #10/0 Liner, apply 2 coats of FN-037 Chartreuse to the eye of the frog. Apply 1 coat of SC-15 Tuxedo to the pupil. Add dots to the ladybug and apply to the dragonfly body. Allow to dry.
  10. Using a CB-604 #4 Soft Fan, apply 2 coats of EL-121 Copper Adventurine  to the entire plaque. Allow to dry.
  11. Stilt and fire to shelf cone 06.

custom-css-security