Cobbled Trees
- Details
- Last Updated: Thursday, 29 May 2014 19:35
Bisque
- MB-889 8" Asian Flair Square Plate
- SC-88 Tu Tu Tango
- FN-009 Black
- SG-202 White Cobblestone
- CB-106 #6 Script Liner
- CB-604 #4 Soft Fan
- BT-910 Synthetic Sponges
- Tree Stencil (TCW251S Branches Reversed - www.thecraftersworkshop.com) - Hobby Lobby
- Stencil Adhesive
- Designer: Marcia Roullard
- Skill Level: Basic
- Time: 1½ hours
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using a CB-604 #4 Soft Fan, apply 2-3 Coats of FN-009 Black to the plate.
- Spray the back of the stencil with stencil adhesive, follow directions on the can. You may need more than one coat.
- Plate needs to be dry so the adhesive will work. Set the stencil on the plate, press down the edges.
- Using a CB-106 #6 Script Liner, apply 2 coats of SG-202 White Cobblestone to the tree stencil area. Wait for the first coat to lose its shine before applying the next coat.
- When the last coat looses its shine, apply 1 coat of SC-88 Tu Tu Tango over the SG-202 White Cobblestone, with a CB-106 #6 Script Liner.
- Remove the stencil by pulling it straight up. If any of the SG-202 White Cobblestone has leaked underneath the stencil, brush over with a couple of coats of FN-009 Black.
- Stilt and fire to shelf cone 06/05.