Crystal Flowers Vase
- Details
- Last Updated: Tuesday, 27 January 2015 21:42
Products Used
Bisque- MB-1298 Flat Vase
- CG-756 Firecracker
- CG-753 Sassy Orange
- CG-968 Peppermint Twist
- CG-954 Wildfire
- SC-6 Sunkissed
- SC-26 Green Thumb
- SC-78 Lime Light
- SC-88 Tu Tu Tango
- FN-001 White
- SG-403 Red
- SG-407 Yellow
- SG-408 Orange
- SG-402 White
- SG-405 Green
- S-2101 Crystal Clear
Decorating Accessories
- BT-910 Synthetic Sponge
- ST-339 Star Swirls
- AC-213 LG. Sponge on a Stick
- AC-230 Clay Carbon Paper
- CB-604 #4 Soft Fan
- CB-106 #6 Script Liner
- CB-110 #10/0 Liner
Miscellaneous Accessories
- Pencil
- 1/2" Circle Paper Punch
- Paper
- Download: Pattern
Designer: Marcia Roullard
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Thin S-2101 Clear with water (3:1) to roll to the inside. Pour out excess and drain, wiping away any exces with a BT-910 Synthetic Sponge.
- Using CB-604 #4 Soft Fan, apply 3 coats of SC-6 Sunkissed in the neck of the vase.
- Using AC-230 Clay Carbon Paper, trace or pencil on the pattern.
- Brush 3 coats of SC-6 Sunkissed to the three yellow circles.
- Punch out 3, 1/2" circles from copy paper. Wet with water and stick to yellow glaze. Using CB-604 #4 Soft Fan, brush 2 coats of CG-756 Fire Cracker to the largest center, make sure to use lots of crystals. Pull off the paper dots.
- Using CB-106 #6 Script Liner, brush a ring of SC-6 Sunkissed around the Firecracker center.
- When dry, stroke and dot with SG-403 Red over the Sunkissed.
- Using CB-604 #4 Soft Fan, apply 2 coats of CG-968 Peppermint Twist to the next largest flower's center. Using CB-106 #6 Script Liner, brush a ring around the center with SC-74 Hot Tamale.
- When dry, detail the Hot Tamale ring with SG-402 White with SG-403 Red dots.
- Using CB-604 #4 Soft Fan, apply 2 coats of CG-954 Wildfire to the top flower's center. Make loops around the center with SG-408 Orange, use SG-407 Yellow to color the center of the loops.
- Using CB-604 #4 Soft Fan, apply 2 coats of CG-753 Sassy Orange to the center of the flower next to the bottom flower. Using CB-106 #6 Script Liner, brush a ring around the venter withSC-74 Hot Tamale. When dry, draw loops with SG-407 over the Hot Tamale.
- Using CB-604 #4 Soft Fan, apply 2 coats of CG-756 Firecracker to the final flower's center. Using CB-106 #6 Script Liner, brush a ring around the center with SC-23 Jack O' Lantern. When dry, use SG-407 Yellow and draw lines as detail over the orange glaze.
- Use SC-26 Green Thumb and SC-78 Limelight for the leaves and stems. Load CB-106 #6 Script Liner with SC-78 Limelight, tip the brush in SC-26 Green Thumb, press to the base of the leaf, pull brush to the tip. Apply 2 coats.
- using CB-110 #10/0 Mini Liner, draw the stems using SC-26 Green Thumb.
- Outline and vein leaves and stems with SG-405 Green.
- Using AC-213 Large Sponge On a stick, pounce ST-339 Star Swirls with SC-88 Tu Tu Tango to fill in the background with a random pattern.
- When dry, using CB-604 #4 Soft Fan, apply S-2101 Crystal Clear to the exterior.
- Stilt and fire to cone 06.