Tiger Lily Plate
- Details
- Last Updated: Tuesday, 13 December 2016 14:44
Bisque
- MB-891 14" Asian Flair Square Plate
- FN-009 Black
- S-2101 Crystal Clear Brushing Glaze
- UG-21 Leaf Green
- UG-22 Spring Green
- UG-46 Bright Yellow
- UG-50 Jet Black
- UG-204 Orange
- UG-206 Fire Engine Red
- UG-210 Forest Green
- AC-230 Clay Carbon Paper
- BT-910 - Synthetic Sponges
- CB-106 #6 Script Liner
- CB-110 #10/0 Liner
- CB-618 #8 Soft Fan
- Pencil
- Paper Towel
- ¼" Masking Tape
- ½" Masking Tape
- 1" Masking Tape
- Download Project Pattern: Tiger Lilly Plate Pattern
- Designer: Maria Pilar del Pino
- Skill Level: Intermediate
- Time: 2 hours
- Download Project (pdf)
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using a CB-618 #8 Soft Fan, apply 3 coats of UG-50 Jet Black to the top of the plate. Allow to dry.
- Using AC-230 Clay Carbon Paper, trace on the pattern.
- Using a CB-106 #6 Script Liner, apply 3 coats of UG-204 Orange on the flowers. Allow to dry.
- Using a CB-106 #6 Script Liner, shade the flowers randomly with UG-204 Orange, UG-206 Fire Engine Red, and UG-46 Bright Yellow. Allow to dry.
- Using a CB-106#6 Script Liner, apply 3 coats of UG-22 Spring Green to the stems.
- Using a CB-110 #10/0 Liner, apply UG-50 Jet Black on the flowers to make the dots. Also with the Liner use UG-50 on the top of the stems.
- Using a CB-106 #6 Script Liner, apply 3 coats of UG-21 Leaf Green to the leaves.
- Using a CB-110 #110, randomly apply long stripes with UG-22 Spring Green and UG-210 Forest Green to shade.
- When dry, mask different areas with different widths of masking tape.
- Using a CB-618 #8 Soft Fan, apply 2 coats of S-2101 Crystal Clear Brushing Glaze to the top of the plate. When the second coat of glaze losses its shine, remove the masking tape. Allow to dry.
- Using a CB-618 #8 Soft Fan. apply 3 coats of FN-009 Black to the back of the plate. Allow to dry.
- Stilt and fire to shelf cone 06.