Welcome Little One

• Print
• Email

Details

Last Updated: Friday, 17 October 2014 14:31

Designer: Tim McPherson

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. Using the CB-604 # 4 Soft Fan, apply 2 coats of FN-001 White to the top area of the plate.
3. Using the CB-604 # 4 Soft Fan, apply 2 coats of FN-009 Black to the back and side edges of the plate.
4. Mark off the top and bottom border with Masking Tape, about 1” wide.
5. Using the AC-230 Clay Carbon Paper, trace on the pattern.
6. Using the AC-211 Sponge on a Stick, 3/8” Round, apply circles to the background area using SC-31 The Blues, SC-27 Sour Apple, SC-95 Pinkie Swear, SC-96 Aqu-ward and SC-97 Cant-elope. Repeat with these colors using a brush handle to the inside area of the basket.
7. Using the CB-110 # 10/0 Liner, apply 2 to 3 coats of SC-35 Gray Hare to the handle and center area on the wheels.
8. Using the CB-106 # 6 Script Liner, apply 3 coats of SC-96 Aqu-ward to the center area on the baskets cover.
9. Using the CB-106 # 6 Script Liner, apply 3 coats of SC-27 Sour Apple to the remaining areas on the baskets cover.
10. Mark the edge along the masking tape, then remove the tape.
11. Using the CB-604 # 4 Soft Fan, apply 3 coats of SC-31 The Blues to one of the borders and SC-95 Pinkie Swear to the other border. Allow to dry.
12. Using the AC-230 Clay Carbon Paper, trace on the lettering.
13. Using the CB-110 # 10/0 Liner, fill in the lettering and tires with 2 coats of SC-15 Tuxedo.
14. Using the CB-110 # 10/0 Liner loaded in SC-15 Tuxedo, outline and detail the basket.
15. Using a brush handle, add dots to the border area with SC-16 Cotton Tail.
16. Stilt and fire to shelf cone 05/06.