Pastel Christmas Trees
- Details
- Last Updated: Thursday, 05 December 2019 15:57
Products Used
Bisque- Clay Magic Mold - Mantel Tree Mold #4140
- Clay Magic Mold - Scene Base Mold #4143
Pink Tree
- FN-209 Floral Pink
- SC-89 Cutie Pie Coral
- SG-302 Snowfall
- Fired Gold
- Luster or Mother of Pearl
Lime Green Tree
- FN-224 Key Lime
- FN-231 Clearly Jade
- SG-302 Snowfall
- Fired Gold
- Luster or Mother of Pearl
Seafoam Tree
- CG-997 Seafoam
- SC-29 Blue Grass
- SG-302 Snowfall
- Fired Gold
- Luster or Mother of Pearl
Orange Tree
- FN-207 Orange Slice
- SC-Orange Ya Happy
- SG-302 Snowfall
- Fired Gold
- Luster or Mother of Pearl
Decorating Accessories
- CB-604 Soft Fan
- luster brush
- gold brush
- Essence for cleaning Luster brushes
- AC-222 Writer Tip Kit
Decorating Accessories
- Plastic Flame Bulbs
- Star & Light Kit
Instructions
Pink Tree
-
Cast and poke holes in the tree for the lights, hole in the base for cord, and light socket, (used a large socket with a tube bulb, hole size is approx... ¼ inch for the threaded rod.
-
Clean and fire to cone 04.
-
Brush the over the detail in the base with one coat of slightly thinned SC-89 Cutie Pie Coral, wipe back with a damp sponge so the color stays in the detail/
-
Brush on three coats of FN-209 Floral Pink over the tree and entire base.
-
Snip the top of AC-222 Plastic bottle to make the opening larger, fill with SG-302 Snowfall, squirt the on the edges of all the branches, squirt on the hills on the base, and roof tops, use a brush to drag the edges of the snowfall over sections of the roof top and the hills Use a small brush to apply to the trees on the base.
-
Make sure the holes are clean or will still fit the flame bulbs before firing.
-
Fire to cone 05/06.
-
Use a flexible tape, to tape off the trim edge of the tree, brush the trim with one coat of fired Gold Luster, and make sure to use a new brush, clean the brush in Essence. Mark the brush for gold only so not to contaminate with other lusters.
-
Fire to cone 018.
-
Brush on one coat of Luster or Mother of Pearl, over all the tree including the snowfall and the base fire to cone 020. Use a soft full brush for this, mark it for Luster, clean in essence that is only for this product so not to contaminate the brush and product.
Lime Green Tree
-
Cast and poke holes in the tree for the lights, hole in the base for the cord, and light socket, (used a large socket with a tube bulb, hole size is approx... ¼ inch for the threaded rod.
-
Clean and fire to cone 04.
-
Brush over the detail in the base with one coat of FN-231 Clearly Jade, wipe back with a damp sponge so the color stays in the detail.
-
Brush on three coats of FN-224 Key Lime over the tree and entire base.
-
Snip the top of AC-222 Plastic bottle to make the opening larger, fill with SG-302 Snowfall, squirt the on the edges of all the branches, squirt on the hills on the base, and rooftops, use a brush to drag the edges of the snowfall over sections of the rooftop and the hills. Use a small brush to apply to the trees on the base.
-
Make sure the holes will still fit the flame bulbs before firing.
-
Fire to cone 05/06.
-
Use a flexible tape, to tape off the trim edge of the tree, brush the trim with one coat of fired Gold Luster, and make sure to use a new brush, clean the brush in Essence. Mark the brush for gold only so as not to contaminate with other lusters.
-
Fire to cone 018
-
Brush on one coat of Luster or Mother of Pearl, overall the tree including the snowfall and the base fire to cone 020. Use a soft full brush for this, mark it for Luster, clean in essence that is only for this product so as not to contaminate the brush and product.
Seafoam Tree
-
Cast and poke holes in the tree for the lights, hole in the base for the cord, and light socket, (used a large socket with a tube bulb, hole size is approx... ¼ inch for the threaded rod.
-
Clean and fire to cone 04.
-
Brush over the detail in the base with one coat of slightly thinned SC-29 Blue Grass, wipe back with a damp sponge so the color stays in the detail.
-
Brush on three coats of CG-997 Seafoam over the tree and entire base.
-
Snip the top of AC-222 Plastic bottle to make the opening larger, fill with SG-302 Snowfall, squirt the on the edges of all the branches, squirt on the hills on the base, and rooftops, use a brush to drag the edges of the snowfall over sections of the rooftop and the hills. Use a small brush to apply to the trees on the base.
-
Make sure the holes will still fit the flame bulbs before firing.
-
Fire to cone 05/06.
-
Use a flexible tape, to tape off the trim edge of the tree, brush the trim with one coat of fired Gold Luster, and make sure to use a new brush, clean the brush in Essence. Mark the brush for gold only so as not to contaminate with other lusters.
-
Fire to cone 018. Brush on one coat of Luster or Mother of Pearl, overall the tree including the snowfall and the base fire to cone 020. Use a soft full brush for this, mark it for Luster, clean in essence that is only for this product as not to contaminate the brush and product.
Orange Tree
-
Cast and poke holes in the tree for the lights, hole in the base for the cord, and light socket, (used a large socket with a tube bulb, hole size is approx... ¼ inch for the threaded rod.
-
Clean and fire to cone 04.
-
Brush the over the detail in the base with one coat of slightly thinned SC-50 Orange ya Happy, wipe back with a damp sponge so the color stays in the detail.
-
Brush on three coats of FN-207 Orange Slice over the tree and entire base.
-
Snip the top of AC-222 Plastic bottle to make the opening larger, fill with SG-302 Snowfall, squirt the on the edges of all the branches, squirt on the hills on the base, and roof tops, use a brush to drag the edges of the snowfall over sections of the roof top and the hills. Use a small brush to apply to the trees on the base.
-
Make sure the holes will still fit the flame bulbs before firing.
-
Fire to cone 05/06.
-
Use a flexible tape, to tape off the trim edge of the tree, brush the trim with one coat of fired Gold Luster, and make sure to use a new brush, clean the brush in Essence. Mark the brush for gold only so as not to contaminate with other lusters.
-
Fire to cone 018.
-
Brush on one coat of Luster or Mother of Pearl, overall the tree including the snowfall and the base fire to cone 020. Use a soft full brush for this, mark it for Luster, clean in essence that is only for this product so as not to contaminate the brush and product.