Bold Turkey
- Details
- Last Updated: Wednesday, 08 November 2017 17:26
Bisque
- MB-890 - Asian Flair 11" Square Plate
- CG-753NT - Sassy Orange
- CG-756NT - Firecracker
- CG-961NT - Evergreen
- FN-017 - Purple
- SC-5 - Tiger Tail
- SC-6 - Sunkissed
- SC-15 - Tuxedo
- SC-16 - Cotton Tail
- SC-24 - Dandelion
- SC-71 - Purple-licious
- SC-74 - Hot Tamale
- SP-205 - Speckled Tiger Tail
- SP-206 - Speckled Sunkissed
- AC-230 - Clay Carbon Paper
- BT-910 - Synthetic Sponges
- CB-110 - #10/0 Liner
- CB-404 - #4 Pointed Round
- CB-604 - #4 Soft Fan
- Designer: Tim McPherson
- Skill Level: Basic
- Time: 2 hours
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean BT-910 Synthetic Sponge and wipe bisque to remove any dust.
- Apply masking tape to the edge of the plate; bring it to the edge to create a border.
- Using AC-230 Clay Carbon Paper, trace on the pattern.
- Using a CB-404 # 4 Pointed Round, apply 3 coats of SC-6 Sunkissed to every other feather and SP-206 Speckled Sunkissed to the remaining feathers.
- To the face, apply 3 coats of SC-5 Tiger Tail.
- To the body, apply 3 coats of SP-205 Speckled Tiger Tail.
- Using a CB-404 # 4 Pointed Round, apply 3 coats of SC-71 Purple-licious to the hat band.
- Using a CB-404 # 4 Pointed Round or CB-110 # 10/0 Liner, apply 2 coats of SC-24 Dandelion to the buckle on the hat and his beak.
- Using a CB-404 # 4 Pointed Round, apply 2 coats of SC-15 Tuxedo to the hat and hat rim, and the sky area behind the wings.
- Using a CB-404 # 4 Pointed Round, apply 1 coat of SC-74 Hot Tamale to the waddle, then 1 coat of CG-756 Firecracker.
- Using a CB-404 # 4 Pointed Round, apply to the tips of the wings a small amount of CG-753 Sassy Orange and blend towards the body.
- Using a CB-110 # 10/0 Liner, fill in the eye with SC-16 Cotton Tail, add the pupil with SC-15 Tuxedo.
- Remove the masking tape.
- Outline and detail the entire design with a CB-110 # 10/0 Liner loaded in SC-15 Tuxedo.
- Using a CB-604 # 4 Soft Fan, apply 3 coats of FN-017 Purple Foundation to the border and back of the plate.
- Apply 1 coat of CG-971 Purple Cosmos over the border area. Allow to dry.
- Stilt and fire to shelf cone 06.