Red Fox
- Details
- Last Updated: Thursday, 13 June 2019 20:56
Bisque
- DT-661 6"x6" Bisque Tile
- SC-16 Cotton Tail
- SC-26 Green Thumb
- SC-34 Down To Earth
- SC-88 Tu Tu Tango
- FN-031 Cornflower Blue
- SG-401 Black Designer Liner
- CB-106 #6 Script Liner
- CB-110 #10/0 Liner
- CB-604 #4 Soft Fan
- BT-910 Synthetic Sponge
- AC-213 Sponge on a Stick
- ST-367 Leafy Border Stamp
- Designer: Marcia Roullard
- Skill Level: Basic
- Time: 1½ hours
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Cut out the shape of the fox pattern.
- Position the pattern on the tile. With a pencil, trace the fox shape on to the tile.
- Using a CB-106 #6 Script Liner, apply 2-3 coats of SC-88 Tu Tu Tango to the fox.
- Wet the fox area with water then stick the paper cut out paper fox to the painted fox on the tile, to act as a mask. Blot with a paper towel to absorb any excess water.
- Using a CB-604 #4 Soft Fan, apply 3 coats of FN-031 Cornflower Blue to the tile.
- Brush SC-16 Cotton Tail into the wet FN-031 Cornflower Blue on the last coat of the blue around the paper fox, remove the paper cut out fox pattern.
- Pencil in the tree with limbs.
- Using a CB-106 #6 Script Liner and CB-110 #10/0 Liner, apply 2 two coats of SC-34 Down to Earth to the tree and limbs.
- Using the AC-213 Sponge on a Stick, pat the leaf stamp with SC-26 Green Thumb only individual leaves, then press to the tile over the limbs. Allow to dry.
- Outline and detail the fox, tree and limbs with SG-401 Black Designer Liner.
- Pat the leaf stamp with some SG-401 Black Designer Liner then stamp over the Green thumb leaves, not necessary to get it on perfect. Allow to dry.
- Using a CB-604 #4 Soft Fan, apply 1 coat of S-2101 Crystal Clear Brushing to design area. Allow to dry.
- Stilt and fire to shelf cone 06/05.