Like A Big Pizza Pie
- Details
- Last Updated: Monday, 25 February 2013 16:41
Products Used
Bisque
Bisque
- SB-107 Pizza Stone
- SG-401 Designer Liner
- SW-002 Matte Clear
- SW-120 Northern Woods
- SW-252 Blue Opal
- CB-106 #6 Script Liner
- CB-604 #4 Soft Fan
- BT-910 Synthetic Sponges
Additional Materials
- Pencil
- Ruler
- Banding Wheel (Turntable)
Project Info
- Designer: Nate Klein
- Skill Level: Basic
- Time: 1½ hours
- Download Project (pdf)
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Center the pizza stone on a banding wheel. Make a center circle about 7 ½” diameter and a boarder about 1” wide in from the edge of about ¼” edge.
- Sketch on the letters for a choice of your favorite saying (LIKE A BIG PIZZA PIE…).
- With SG-401 Designer Liner, outline all the letters and create different doodles inside each letter.
- Using a CB-604 #4 Soft Fan and a CB-106 #6 Script Liner, apply 3 coats of SW-120 Northern Woods to the center of the pizza stone and to the 1” border. Allow to dry.
- Apply 3 coats of SW-252 Blue Opal over the SW-120 Northern Woods. Allow to dry.
- Apply 2 coats of SW-002 Matte Clear to the letter area and the outer rim of the pizza stone.
- Make sure there is no glaze (dry footed) on the back of the pizza stone. Stoneware can not be stilted when glaze firing
- Fire shelf cone 5/6.